Here I have found the easiest way to fix the DNS server isn’t responding or DNS Server Not Responding error. The “DNS Server Not Responding” error is occurs because of network problems, also occurs because of bad network providers. DNS error is most common error in Windows and because of DNS server error there are many problems arise like DNS_PROBE_FINISHED_NXDOMAIN, DNS_PROBE_FINISHED_NO_INTERNET, etc. So here I have found the easiest way to fix the “DNS server isn’t responding” error.
Solution 1: Using CMD to Fix DNS Errors
Open Command Prompt as an Administrator.
Now Run below commands one by one.
netsh int ip set dns
netsh winsock reset
Restart your PC and check your Internet Connection.
Solution 2: Turn OFF your Internet Device for 1 Minutes
Turn OFF your Internet Device (Wireless Router, Ethernet, LAN, etc) and remove all Plugs and Wires and then re-attach after 1 Minutes. Then Turn ON your device. That’s it.
Solution 3: Change The DNS Addresses
Right click on network icon and click “Open Network and Sharing Center“.
Now click “Change adapter settings” and right-click on your network connection and click Properties.
Now select “Internet Protocol Version 4 (TCP/IPv4)” and click Properties.
Now add below DNS server addresses as shown as below image.
Preferred DNS Server: 220.127.116.11
Alternate DNS Server: 18.104.22.168
That’s it. Now close all dialog boxes and check your Internet.
The DNS Server Not Responding error is common Internet and Network error and the above solutions are working 100% and solve your DNS problems. But if you still receive the DNS errors, then comment below.