This blue screen error occurs when the ACPI.sys is corrupted, or the windows acpi driver is corrupted. This error also occurs when some hardware is changed. Basically acpi manages power in the computer so your device works efficiently. So this is necessary to solve the issue. Here are some easy fixes that may help you out to fix the error.
Table of Contents
Fix 1: Update ACPI driver
Step 1: Download good driver updater software and install it.
Step 2: Find an ACPI driver from it and Update it.
Step 3: Restart your PC.
Fix 2: RUN SFC SCAN Command
This is the easiest way to solve the problem if the error is caused by the corruption of official windows files. Here are the steps to check the files.
Step 1: Press windows key and Type CMD. By right click on it, RUN AS ADMINISTRATOR. Accept yes on any UAC permissions.
Step 3: Let complete the scan and let it automatically repair the corrupted files.
Fix 3: Removing recent hardware
If you have installed new hardware and this error caused just after install than check by temporary removing the hardware. If error not comes again then the new hardware is faulty.
Fix 4: Removing recently installed software that may interfere with ACPI
Remove any recently installed software and check for the error again. If the error is gone than the software might be the problem. Basically some software can interact with ACPI.SYS and manages it and edit it periodically. So sometime this error can happen with new software.
Fix 5: Checking RAM and Hard disk for the errors
Sometimes the failure of ram and hard disk can occur the BSOD of ACPI.SYS
Lets first check a RAM for the errors
Step 1: Press ‘’windows key’’ and type ‘’Windows Memory Diagnostic’’ and open it.
Step 2: Now click on ‘’Restart now and check for problems (recommended)’’. It will restart the pc and check for the RAM errors. If you found error on ram than changing a ram will be a good idea. If you see ‘’no problems have been detected yet’’ than there might be other issue.
Step 3: Open ‘’my computer’’ and right click on ‘’C drive’’ and go to properties
Step 4: Now, go to tools and click on the check.
Step 5: Now click on the SCAN DRIVE. Do this for all drives and check for the errors.
By doing these fix you can resolve the BSOD error easily. If still problem persist than fresh install windows or do image restore can help.